top of page
Search
Fahad Gohar
Mar 8, 20211 min read
#Oil&Gas_#Upstream_Std#Rig_Equip Part 2
11A. Drilling Riser 11B. Drilling Riser Overview 12. Water Tank 13. Electric Cable Tray 14. Engine Generator Set 15. Fuel Tanks 16....
0 comments
Fahad Gohar
Mar 6, 20211 min read
#Oil&Gas_#Upstream_Std#Rig_Equip Part 1
1. The Tower called Derrick or Mast 2. Crown block & water table 3. Drilling Line 4. Monkey Board 5. Travelling Block 6. Top Drive 7....
0 comments
Fahad Gohar
Mar 4, 20212 min read
#Oil&Gas_#Downstream_Operation
Processing, transporting, refining crude oil & gas into gasoline, natural gas liquids, diesel and a variety of other energy sources as...
0 comments
Fahad Gohar
Mar 4, 20211 min read
#Oil&Gas_#Midstream_Operation
Midstream activities include the processing, storing, transporting and marketing of oil, natural gas, and natural gas liquids. Major...
0 comments
Fahad Gohar
Mar 3, 20213 min read
#Oil&Gas#UpStream_Operation
Upstream Operations: Upstream oil and gas production and operations identify deposits, drill wells, and recover raw materials from...
Fahad Gohar
Jul 16, 20203 min read
#Drilling Processes & #Well Completion
The Oil Drilling Process The crew sets up the rig and starts the drilling operations. First, from the starter hole, the team drills a...
0 comments
Fahad Gohar
Jul 7, 20202 min read
Drill_Stem_Test Operation (DST)
Well tests conducted with thedrillstringstill in the hole. Often referred to as DST, these tests are usually conducted with a downhole...
0 comments
Fahad Gohar
Jul 7, 20202 min read
Hydraulic_Fracturing_Process
Hydraulic Fracturing Process Hydraulic fracturing happens in small sections called stages. It starts at the end of the wellbore and moves...
0 comments
Fahad Gohar
Apr 13, 20202 min read
#Acceptance_Quality_Limit
What Is Acceptable Quality Level (AQL)? The acceptable quality limit (AQL) is a measure applied to products and defined in ISO 2859-1 as...
0 comments
Fahad Gohar
Apr 8, 20202 min read
#Equipment_Overall_#Effeciency
Equipment_Overall_Efficiency
0 comments
Fahad Gohar
Feb 15, 20202 min read
#Quality_Function_Deployment #QFD
Quality Function Deployment, or QFD, is a model for product development and production popularized in Japan in the 1960’s. Quality...
0 comments
Fahad Gohar
Feb 15, 20202 min read
Basic Tools in #Quality_Control
7 Management Tools For Quality Control 1. Flowchart Flowcharts are also used to document work process flows. This tool is used when...
0 comments
Fahad Gohar
Oct 24, 20191 min read
Quality Mgt Sys & HSE / Industrial System Engineer Specialist / QHSE Engineer
Nationality : United States Of America Languages: Arabic Fluent / English Fluent Master (MSAS), Science (Applied Statistics) Kennesaw...
0 comments
Fahad Gohar
Oct 17, 20193 min read
#IATF_16949:2016
The IATF 16949 structure is split into 11 sections. The first three are introductory, with the last seven containing the requirements for...
0 comments
Fahad Gohar
Oct 17, 20193 min read
Seven_Essential_Quality_Tools
What are the 7 QC Tools? The 7 QC tools as defined by the American Society for Quality (ASQ) and accepted throughout the quality...
0 comments
Fahad Gohar
Sep 29, 20193 min read
#Process_Capability
In every process, there exists a certain amount of variation. Variation in a process cannot be eliminated, but it can be measured,...
0 comments
Fahad Gohar
Sep 24, 20192 min read
#Measurement_System_Analysis
Measurement Systems Analysis Fundamentals Determine the number of appraisers, number of sample parts, and the number of repeat readings....
0 comments
Fahad Gohar
Sep 19, 20192 min read
#Failure_Modes_and_Effects_Analysis (FMEA)
Failure Modes and Effects Analysis (FMEA) is methodology for analyzing potential reliability problems early in the development cycle...
0 comments
bottom of page