Fahad GoharApr 184 min#Oil&Gas_TrippingTripping refers to the process of removing and/or replacing pipe from the well when it is necessary to change the bit or other piece of...
Fahad GoharApr 182 min#Oil&Gas_KICKA kick is defined as an unexpected and unwanted influx of reservoir fluid, oil, water, or gas, into the wellbore due to an underbalanced...
Fahad GoharApr 171 min#Oil&Gas_DESilterA hydrocyclone much like a desander except that its design incorporates a greater number of smaller cones. As with the desander, its...
Fahad GoharApr 161 min#Oil&Gas_DEsanderA hydrocyclone device that removes large drill solids from the whole mud system. The desander should be located downstream of the shale...
Fahad GoharApr 151 min#Oil&Gas_DEgasserA degasser is a device used in drilling to remove gasses from drilling fluid which could otherwise form bubbles. Degassers are designed...
Fahad GoharApr 13, 20202 min#Acceptance_Quality_LimitWhat Is Acceptable Quality Level (AQL)? The acceptable quality limit (AQL) is a measure applied to products and defined in ISO 2859-1 as...
Fahad GoharFeb 15, 20202 min#Quality_Function_Deployment #QFDQuality Function Deployment, or QFD, is a model for product development and production popularized in Japan in the 1960’s. Quality...
Fahad GoharFeb 15, 20202 minBasic Tools in #Quality_Control7 Management Tools For Quality Control 1. Flowchart Flowcharts are also used to document work process flows. This tool is used when...
Fahad GoharOct 17, 20193 min#IATF_16949:2016The IATF 16949 structure is split into 11 sections. The first three are introductory, with the last seven containing the requirements for...
Fahad GoharOct 17, 20193 minSeven_Essential_Quality_ToolsWhat are the 7 QC Tools? The 7 QC tools as defined by the American Society for Quality (ASQ) and accepted throughout the quality...
Fahad GoharSep 29, 20193 min#Process_CapabilityIn every process, there exists a certain amount of variation. Variation in a process cannot be eliminated, but it can be measured,...
Fahad GoharSep 24, 20192 min#Measurement_System_AnalysisMeasurement Systems Analysis Fundamentals Determine the number of appraisers, number of sample parts, and the number of repeat readings....
Fahad GoharSep 19, 20192 min#Failure_Modes_and_Effects_Analysis (FMEA)Failure Modes and Effects Analysis (FMEA) is methodology for analyzing potential reliability problems early in the development cycle...
Fahad GoharSep 12, 20193 min#Lean #Six_Sigma #5S5S represents Japanese words that describe the steps of a workplace organization process. English equivalent words are shown in...
Fahad GoharSep 12, 20193 min#Sulfuric #Acid #Hazards Other names or identifying information for sulfuric acid: CAS Registry No.: 7664-93-9 Other Names: Battery acid, sulphuric acid Main...
Fahad GoharAug 26, 20192 minExcavation in Construction/TrenchingWorking in an excavation is one of the most hazardous jobs in the construction industry. Most excavation accidents are the result of...
Fahad GoharMar 23, 20192 min#Beryllium #HazardsAccording to NIOSH "workers exposed to particles, fumes, mists and solutions from beryllium-containing materials may develop beryllium...