Fahad Gohar
#Oil&Gas_Tripping
Tripping refers to the process of removing and/or replacing pipe from the well when it is necessary to change the bit or other piece of...
top of page
Search
Fahad Gohar
- Apr 18, 2022
- 2 min
#Oil&Gas_KICK
A kick is defined as an unexpected and unwanted influx of reservoir fluid, oil, water, or gas, into the wellbore due to an underbalanced...
Fahad Gohar
- Apr 17, 2022
- 1 min
#Oil&Gas_DESilter
A hydrocyclone much like a desander except that its design incorporates a greater number of smaller cones. As with the desander, its...
Fahad Gohar
- Apr 16, 2022
- 1 min
#Oil&Gas_DEsander
A hydrocyclone device that removes large drill solids from the whole mud system. The desander should be located downstream of the shale...
Fahad Gohar
- Apr 15, 2022
- 1 min
#Oil&Gas_DEgasser
A degasser is a device used in drilling to remove gasses from drilling fluid which could otherwise form bubbles. Degassers are designed...
Fahad Gohar
- Apr 7, 2021
- 1 min
#Oil&Gas_Mud_Gas_Separator
The mud/gas separator is designed to provide effective separation of the mud and gas circulated from the well by venting the gas and...
Fahad Gohar
- Apr 7, 2021
- 1 min
#Oil&Gas_Actuators
Actuators can automate valves so that no human interaction with the valve package is necessary to cycle the valve. They can be remotely...
Fahad Gohar
- Apr 2, 2021
- 1 min
#Oil&Gas_Compressors
In the oil and natural gas sector, the most prevalent types of compressors used are reciprocating and centrifugal compressors. ... In the...
Fahad Gohar
- Apr 2, 2021
- 1 min
#Oil&Gas_Furnaces
Industrial heat treats furnaces provide a key role in the production and distribution of energy. The oil & gas industry uses industrial...
Fahad Gohar
- Apr 2, 2021
- 1 min
#Oil&Gas_Boilers
A Boiler is a piece of equipment which acts as a closed vessel to convert the water inside into steam. In order for this to happen...
Fahad Gohar
- Mar 31, 2021
- 2 min
#Oil&Gas_Choke_Manifold
Manifold used to lower the pressure from the wellhead. It consist of a set of high pressure valves and at least two chokes. These chokes...
Fahad Gohar
- Mar 31, 2021
- 1 min
#Oil&Gas_Evaporator
Water is a major component in all phases of oil and gas production Evaporation technology is an accepted method of treating oilfield...
Fahad Gohar
- Mar 31, 2021
- 2 min
#Oil&Gas_Air_Coolers
Water shortage and increasing costs, together with more recent concerns about water pollution and cooling tower plumes, have greatly...
Fahad Gohar
- Mar 28, 2021
- 1 min
#Oil&Gas_#Glyco_Pump
When natural gas is produced from an underground reservoir, it is saturated with water vapor and might contain heavy hydrocarbon...
Fahad Gohar
- Mar 28, 2021
- 1 min
#Oil&Gas_#Inlet_Separator
An oil/gas separator is a pressure vessel used for separating a well stream into gaseous and liquid components. They are installed either...
Fahad Gohar
- Mar 28, 2021
- 3 min
#Oil&Gas_Pumps
Industrial pumps are essential devices required in every phase of oil and gas operations. Basically, they help transfer process fluids...
Fahad Gohar
- Mar 28, 2021
- 1 min
#Oil&Gas_#Reboiler
The reboiler, as the name implies, is a device used to replenish the heat lost by a process commodity. It is natural that during the...
Fahad Gohar
- Mar 27, 2021
- 1 min
#Oil&Gas_Accumulator_( Koomey unit)
A device used in a hydraulic system to store energy or, in some applications, dampen pressure fluctuations. Energy is stored by...
Fahad Gohar
- Mar 27, 2021
- 1 min
#Oil&Gas_Reflux
The reflux drum, or accumulator, serves as a distribution point for reflux and distillate. Condensed liquid leaves the reflux drum under...
Fahad Gohar
- Mar 27, 2021
- 1 min
#Oil&Gas#Flash_Tank
The function of a flash tank is to allow high-pressure condensate to flash and a reduced pressure steam. This reduced pressure steam is...
bottom of page